Skip to product information
1 of 4

AMMO 630 Pressure Washer

AMMO 630 Pressure Washer

Limited Run Pressure Washer Pump

Regular price $750.00
Regular price Sale price $750.00
Sale Sold out
Shipping calculated at checkout.

The ultimate car washing tool designed to make washes a breeze.

The ultimate car washing tool designed to make washes a breeze. Don’t be intimidated by the looks – the AMMO 630 Pressure Washer is the perfect tool for both the pro and DIY enthusiast. A collaboration with AR Corporate, the 630TSS Pressure Washer is the same unit used in the AMMO Studio and the workhorse of the range. The sweet spot for detailing applications is 1200-1400psi and the 630TSS is capable of up to 1900PSI with a flow of 2.1 gallons per minute. The powerful 2 horsepower induction motor features thermal protection for increased durability, and the Total Stop System extends pump motor life by shutting off the pressure washer when the trigger is not engaged. This is a must-have tool for getting your own ride clean, or an entire fleet lookin’ good. NOTE: Please read full user manual & warranty terms. Pump requires properly grounded 20 amp 120 volt outlet for safe operation.

  • Limited run of 500 units
  • Power up to 1900psi with 2.1 gallons per minute
  • Black AMMO Powdercoat & signature decals
  • Industry leading Triplex pump with forged brass head & ceramic plungers
  • All New Upgraded Total Stop System
  • Pressure knob to tailor pressure to detailing application
  • Built-in detergent dispenser

 

View full details

How do I use AMMO 630 Pressure Washer

Before Starting the Pressure Washer

1. Read all safety instructions throughout user manual.

2. Place unit on dry, firm ground for optimum lubrication of pump.

3. The pressure washer should be as close as possible to the water supply.

4. Tighten all hoses and connections. Check parts and replace if needed.

5. Check oil levels prior to each use. Oil should cover the indicator line on the dipstick.

6. To prevent damage and excessive hose wear, position the pressure washer so the hose does NOT extend across traffic areas. Make sure there are no kinks or twists in the hose.

7. Check to determine if the water supply to the pressure washer exceeds the output of the pump. The output of this unit is 2.1 gallons per minute, so water supply should deliver at least 2.5 gallons per minute.

Operating Instructions

1. Turn on water supply to pump inlet.

2. Plug the power cord into a properly grounded 20 Amp, 120 volt outlet.

3. Purge air from system by removing nozzle and squeezing gun trigger before starting machine. Let water run until there is a steady stream of water coming out of the nozzle.

4. Turn power switch on Pump Unit to "on" ( I ) position.

5. Squeeze trigger on gun to start machine.

During Operation

1. Position the unit so the operator has easy access to the pressure washer and its controls.

2. Do not use the pressure washer outdoors if it is raining, and do not spray the motor or any of its connections.

3. Do not use chemicals or agents which are not compatible with the Buna-N, PVC, or neoprene covering the hose.

4. Do not use acids or caustic material with this unit. Damage due to use with incompatible material will not be considered for warranty.

5. Always test a small area to avoid possible damage to surfaces.

NOTE: Read full user manual and warranty terms prior to use.

AR PRO CART & ACCESSORIES KIT

 https://arblueclean.com/ar-blue-clean-pro600-ccrt-ar-600-series-pro-cart-and-accessories-kit/

AR ACCESSORIES KIT

 https://arblueclean.com/ar-blue-clean-pro600-assk-pro-600-series-accessories-kit/

AMMO 630 Pressure Washer FAQ

Q: Does the AMMO 630 Pressure Washer come with a warranty?

A: Yes, the AMMO 630TSS Pressure Washer is warranted against defects in material and workmanship for a period of 1 year from date of purchase. Warranty is to the original purchaser only, and non-transferable. Please read full warranty for all applicable terms.

Q: What is the recommended pressure for washing vehicles?

A: Inspect the integrity of the paint, seals, and mechanical components before pressure washing. Typical PSI range is between 1200-1400 PSI.

Q: What is the recommended ratio of soap in the foam gun?

A: I recommend 40-60ml of Foam/Brute soap to every 500ml of water. This ratio can be tweaked to preference but leave enough headroom in the foam reservoir.

Q: Where can I find additional wash accessories for the AMMO Pressure Washer?

A: The AMMO 630TSS Pressure Washer features a custom pump unit. Accessories perfectly matched for this unit can be sourced from AR.

"The must-have tool for washing your fleet."

Customer Reviews

Based on 11 reviews
100%
(11)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
E
Ethan
Wow!

My previous pressure washer broke and needed to be replaced. I was planning to get another cheap unit that would be good enough, but remembered seeing this. I live at the end of a dirt road and have 4 cars to keep clean. This pressure washer has made it much less labor intensive to keep things clean. It creates better foam (coverage and thickness) and much more pressure which makes everything go a lot quicker. The unit is solid and definitely made to last. Like every other product from AMMO, this did not disappoint. If you are on the fence, this is definitely worth the investment.

H
H.A.

It’s a solid 10/10 so far

R
Ryan Genard
Favorite Tool in the Garage

I have use the Ammo 630 for the last 5 months and smile every time I use it. Saying this is a professional pressure washer doesn't even do it justice. I've had multiple brand-name electric pressure washers over the years and this just blows them away. This pressure washer is quieter and heavier than any of the reviews can do justice. You know when you pick this machine up and then hear how smoothly it runs, this will last a lifetime with the proper maintenance. Do yourself a favor and buy this machine!

M
Matthew Leitholt
Fantastic Unit

Great flow and pressure. Quieter than my previous Sun Joe and a very fair price. Thanks!