#1 Detail Channel On Youtube
#1 Detail Channel On Youtube
Gelee Pro Wheel & Metal Coat is designed for wheels (painted and non-painted), calipers, exhaust tips, and metal trim on cars and boats. A high temperature resistant, wipe-on formula designed to make cleaning much easier. 1 to 2 years of protection. This is a much stronger product with 5x the solids than in Reflex Pro (for paint) making it non-flexible....ie for metals and wheels. Please wear all recommended protective gear.
1. Wear latex gloves, eye protection, mask, and work in a well-ventilated area
2. Prior to first coat application, wash and clean wheels with PLUM and clay if needed.
3. Use isopropyl alcohol mixed 50-50 with water or an automotive graede wax and silicone remover to decontaminate surface.
4. Prime microfiber applicator and apply to 1 wheel or caliper at a time.
5. Allow 1-2 minutes dwell time until cured (wait for rainbow to appear)
6. Lightly remove excess with a microfiber towel.
NOTE: Best if applied on cool surfaces, out of direct wind, and no water/rain for 6 hours after application
A: 30 secs to 2 minutes. For the inside of the wheel barrel, if applied smooth, can be left on the wheel and not removed for a thicker layer. If you see streaks during application, they will be there when it cures, so apply it smoothly if you choose to use this advanced technique.
Q: Is Gelee Pro safe on all types of wheels including matte finishes?A: Yes, assuming the finish of the wheel has been painted professionally by a manufacturer.
Q: Can Gelee Pro be used on paint?A: It is not designed for paint usage because it contains 5X the amount of "solids" compared to Reflex Pro. This product is stronger, yet less flexible which may cause paint application to crack during paint flex.
Q: How do I prep wheels/metal trim for Gelee Pro application?A: A standard wheel and tire wash is ideal. Plum, Brute, wheel-woolies, wash mit, wheel brush etc... Make sure the wheel is clean and extremely dry. Use compressed air, master-blaster or go for a quick drive around the block. If you remove the wheel from the car, clay maybe helpful on the backside of the rim.
Q: Can I still use applicator pads/towels after applying Gelee Pro?A: Applicators No. Microfiber towels...Yes, if wash within the first hour or so after application. You can throw them in a sink with water if you cannot get to a washing machine quickly.
Q: How should I maintain my wheels after coating with Gelee Pro?A: After cleaning with the Wheel Regimen Kit, use AMMO Reflex Pro Top Coat to maintain the coating finish on the wheels.
Gelee Pro works absolutely brilliantly! I hate (HATE) cleaning wheels but after an application of Gelee Pro, all it takes it just a rinse with the pressure washer and you can literally watch the brake dust wash away before your eyes. No more scrubbing into and out of spokes. It's so good in fact that the family truckster has two coats of it and after driving through rain...the wheels clean themselves! Last but not least, the depth of gloss and shine is incredible.
Genre has drastically cut down the number of times that brake dust costs my silver wheels
Another great product from Larry. Not surprised at this point. Used on my Black Macan wheels to assist with cleaning. Direct comes off soo much easier after application. Very easy to apply. Most of the work was taking the wheels off and putting back on. Highly recommend.
To find out about the latest products, videos, podcasts, training seminars, and AMMO promotions, sign up below and bust into them, they're well worth it. (bring pizza you'll be here for a while.)