AMMO Gelee Pro Wheel & Metal Coat

Purpose built Wheel & Metal Protective Coating


  • Strong heat resistant protection (5x more solids)
  • Simple wipe-on formula
  • Makes cleaning your wheels easier
  • Excellent for any metal trim (cars & boats)
  • Great on exhaust tips
  • * INCLUDES 1 MF APPLICATOR

Gelee Pro Wheel & Metal Coat is designed for wheels (painted and non-painted), calipers, exhaust tips, and metal trim on cars and boats. A high temperature resistant, wipe-on formula designed to make cleaning much easier. 1 to 2 years of protection. This is a much stronger product with 5x the solids than in Reflex Pro (for paint) making it non-flexible....ie for metals and wheels. Please wear all recommended protective gear.

1. Wear latex gloves, eye protection, mask, and work in a well-ventilated area
2. Prior to first coat application, wash and clean wheels with PLUM and clay if needed.
3. Use isopropyl alcohol mixed 50-50 with water or an automotive graede wax and silicone remover to decontaminate surface.
4. Prime microfiber applicator and apply to 1 wheel or caliper at a time.
5. Allow 1-2 minutes dwell time until cured (wait for rainbow to appear)
6. Lightly remove excess with a microfiber towel.
NOTE: Best if applied on cool surfaces, out of direct wind, and no water/rain for 6 hours after application

Q: How long does Gelee Pro take to cure?

A: 30 secs to 2 minutes. For the inside of the wheel barrel, if applied smooth, can be left on the wheel and not removed for a thicker layer. If you see streaks during application, they will be there when it cures, so apply it smoothly if you choose to use this advanced technique.

Q: Is Gelee Pro safe on all types of wheels including matte finishes?

A: Yes, assuming the finish of the wheel has been painted professionally by a manufacturer.

Q: Can Gelee Pro be used on paint?

A: It is not designed for paint usage because it contains 5X the amount of "solids" compared to Reflex Pro. This product is stronger, yet less flexible which may cause paint application to crack during paint flex.

Q: How do I prep wheels/metal trim for Gelee Pro application?

A: A standard wheel and tire wash is ideal. Plum, Brute, wheel-woolies, wash mit, wheel brush etc... Make sure the wheel is clean and extremely dry. Use compressed air, master-blaster or go for a quick drive around the block. If you remove the wheel from the car, clay maybe helpful on the backside of the rim.

Q: Can I still use applicator pads/towels after applying Gelee Pro?

A: Applicators No. Microfiber towels...Yes, if wash within the first hour or so after application. You can throw them in a sink with water if you cannot get to a washing machine quickly.

Q: How should I maintain my wheels after coating with Gelee Pro?

A: After cleaning with the Wheel Regimen Kit, use AMMO Reflex Pro Top Coat to maintain the coating finish on the wheels.

Customer Reviews

Based on 14 reviews
100%
(14)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mike
Great Product

As with all of the AMMO products, this works great. Easy to apply and easy to buff out. Looks great and protects the wheels.

R
Rick Z.
Excellent product!

Excellent product to apply, maintain and extremy durable! Rims stand out and stay well protected. Best of the best, five-star products!

S
SCOTT E YOUMAN
AMMO GELEE PRO WHEEL & METAL COAT

I AM UNABLE TO GIVE A FAIR REVIEW BECAUSE THE WHEELS THAT ARE ON MY CAR ARE NOT ALL A SMOOTH SURFACE EVEN THOUGH THE PRODUCT WAS PUT ON A NEW CAR THE WHEELS HAD RUSTPROOFING RUBBER ON THEM FROM OVERSPRAY AND PAINT OVERSPRAY FROM WHEN THEY DID THE RUST PROTECTION AND PAINTED THE WHEELS. THAT BEING SAID THE FACE OF THE RIMS TO WHICH THE PRODUCT WAS APPLIED TO IS VERY CLEAN AND DOESN'T COLLECT BRAKE DUST AS EASY AS MY TRUCK DOES. I AM HAPPY WITH THE PRODUCT JUST WISH MY PREP GAME WAS MORE IN LINE. I WILL PURCHASE THIS PRODUCT AGAIN WHEN I THROW SOME AFTERMARKET WHEELS ON THE CAR OR IF I HAVE A CHANCE TO GET ALL OF THE GUNK OFF.

JOIN AMMO