Skip to product information
1 of 4

AMMO FRAME PRO TRIM COAT

AMMO FRAME PRO TRIM COAT

Long-lasting Ceramic Trim Coat

Regular price $15.00
Regular price Sale price $15.00
Sale Sold out
Shipping calculated at checkout.

Frame out your ride for the perfect wet look.

Trim looks great when it's new but over time can look faded and stained. Faded trim can make your detail look 90%, but AMMO FRAME PRO TRIM COAT can give you that last 10% back. It’s a long-lasting, semi-permanent solution for restoring the factory finish of textured rough black trim, cladding, and bumpers found on most cars today. AMMO FRAME PRO TRIM COAT is packaged in a convenient dispensable wipe, is easy to apply by hand, and cures quickly within an hour in normal conditions. It’s the best way to "frame" your vehicle’s design. Mask off paint, glass, and other surfaces to avoid accidental contact. Trim must be completely clean, dry, and bare prior to application. Use on rough black plastic trim only (use Mud Tire Gel for smooth surfaces and new vehicle trim).

  • Improves and restores factory trim finish
  • Convenient dispensable wipes (pack of 3)
  • Rich deep finish enhances rough plastic trim surfaces
  • Trim specific ceramic coating with water beading
  • Simple wipe-on formula
  • Durable and long-lasting
View full details

How do I use AMMO FRAME PRO TRIM COAT

1. Wash area with dish soap or BRUTE thoroughly. If necessary, scrub with TITAN 12 degreaser and small stiff brush prior to thorough wash if trim is wax-stained.

2. Dry with compressed air.

3. Put on protective gear: latex gloves, safety glasses, and mask. Work in well-ventilated area.

4. Tape off paint, windows, or other surfaces to avoid accidental contact.

5. Open packet, remove applicator, apply to dry trim with over-lapping motions in even strokes for smooth, "level" layers.

6. Do not get wet or drive for 1 hour to fully cure.

NOTES: Trim must be 100% dry for coating adhesion. Cloth applicator will be strongest during first applications and slowly deplete as product is applied. Be mindful of how much product is "layered" at first. Flip and refold applicator for more product to be released as it becomes dirty.

AMMO FRAME PRO TRIM COAT FAQ

Q: Why does Frame Trim Coat have such a strong smell?

A: Due to the adhesion to trim surfaces and the flexible nature of the plastic, the formula is a specialized trim ceramic that has a very strong odor. PPE is recommended.

Q: What protective gear should I wear when applying Frame?

A: Latex Gloves, Safety Glasses, and Mask. Work in well ventilated area.

Q: Is Frame a ceramic coating?

A: Yes, it's a semi permanent ceramic coating formulated for trim with 1-2 years protection. (weather dependent)

Q: How long should I let Frame cure?

A: Allow frame to cure for 1 hour in dry conditions. Do not drive or get wet prior to Frame curing.

Q: What surfaces are safe to apply Frame?

A:Black trim, plastic cladding, rubber moldings, adheres best to clean textured surfaces.

Q: Is Frame safe to use on plastic trim in engine bays and bumpers by exhausts?

A: Yes, Frame Pro can be applied on appropriate plastic covers and bumpers in these areas if the surface is cool and clean. Vehicle should not be running and Frame should cure for the full 60 minute duration before vehicle operation. Do not apply Frame to engine components or exhaust pipes.

"It's the best way to frame your vehicle's design."

Customer Reviews

Based on 92 reviews
98%
(90)
2%
(2)
0%
(0)
0%
(0)
0%
(0)
A
Anna M Zavala

Amazing stuff. My Toyota Highlander looks New.
Thanks

C
Craig

Awesome product. Easy to apply, doesn't steak. Not sure about how long it last, but it looks great

j
james

Amazing stuff. My Jeep looks new!

L
Laramie Zimmerman
Very nice trim coating.

I like this trim coating. I’ve yet to see how long it lasts but very easy to apply and also looks great. They come in packs of three.