AMMO Gelee Pro Wheel & Metal Coat

Home / Wheels / AMMO Gelee Pro Wheel & Metal Coat

Long-Term Protection Layer in the AMMO Regimen

For high-heat, high-contamination surfaces

This is long-term protection.

AMMO GELEE PRO is a high-solids ceramic coating engineered specifically for wheels and exposed metal surfaces, areas subjected to extreme heat, brake dust, and constant contamination.

With significantly increased solids content compared to traditional coatings, GELEE PRO forms a durable, heat-resistant barrier that slows the buildup of contaminants and simplifies ongoing maintenance.

Applied once. Maintained over time.

Strong heat-resistant protection for wheels & metal trim
Improved ease of cleaning
High gloss slick finish
1-2 years of durable protection
Great on exhaust tips
INCLUDES 1 MF APPLICATOR

1. Wear latex gloves, eye protection, mask, and work in a well-ventilated area

2. Prior to first coat application, wash and clean wheels with PLUM and clay if needed.

3. Use isopropyl alcohol mixed 50-50 with water or an automotive graede wax and silicone remover to decontaminate surface.

4. Prime microfiber applicator and apply to 1 wheel or caliper at a time.

5. Allow 1-2 minutes dwell time until cured (wait for rainbow to appear)

6. Lightly remove excess with a microfiber towel.

NOTE: Best if applied on cool surfaces, out of direct wind, and no water/rain for 6 hours after application

AMMO Plum Wheel Cleaner

$21.00

Sold Out

AMMO Brute Wheel Soap

$16.00

AMMO Mud Tire Gel

$19.00

AMMO REFLEX V ENAMEL COAT

$195.00

See All Reviews

How long does Gelee Pro take to cure?

Is Gelee Pro safe on all types of wheel finishes?

Can Gelee Pro be used on paint?

How do I prep wheels/metal trim for Gelee Pro application?

A thorough wheel and tire wash is ideal. Rinse first, use Plum to remove stubborn contaminants, and perform a contact wash with Brute Wheel Soap. Use your preferred wheel brushes to clean the wheel thoroughly before rinsing off. Make sure the wheel is completely dry before application. Isopropyl alcohol diluted with water 50:50 can be used as a final wipe to remove any remaining residues.

Can I still use applicator pads/towels after applying Gelee Pro?

How should I maintain my wheels after coating with Gelee Pro?

Ammo Gelee Wheel Coating

Decided to try the Ammo Gelle wheel coating on a set of painted wheel being installed on a restomod International Scout project. Product applied exactly as discussed in the instructions. Cured a little slower than suggested but once finished, it came off effortlessly. Coated the face and barrels of the wheels and had enough to do exactly two coats on each area. As per all reviews of ammo products, I’m assured the coating will perform to the highest of standards. As far as initial use and appearance if the wheels when finished, I would highly recommend this product. Thanks Ammo for putting out the highest of quality products.

I FEEL DUMB

I feel dumb for not ceramic coating my wheels before this. M3 competition wheels are hard to clean, and BMW brake dust is the worst, so its a bad combo. Way less scrubbing with Gelee Pro on there now

The best. Why aren’t you buying it now?

Applied this sweet product to my Porsche Boxster wheels.

Easy enough application after a thorough cleaning by following the simple directions.

Now when I power wash the car, brake dust just washes right off with zero manual effort. To test: I washed 1 side w soap foam and no scrubbing. Just power wand. I washed the other side by hand w wheel cleaner, woolies, hand sponge, drying towel etc.

Honestly couldn’t tell the difference—gelee is that good at putting a layer of protection on the wheel. Buy it and reduce your washing effort. Best car wash productivity boost ever.

Most Excellent...Brake dust be gone!

So contacted Larry K to ask what to use on my OEM RS Sypder wheels and he suggested his BRUTE soap and cleaner products...which worked well but still had problems with brake dust residue and discoloration on my now 4 yrs wheels. Option presented to powdercoat them from my local shop which I decided to go with after viewing the excellent quality of other wheels prior done. Now what to do to protect my newly coated wheels in Black Satin now? Gelee was the recommendation and so far they have done the job well. A wheel later and a few spirited drives and they wheels look as good as the when I coated them. Instructions were easy and additional recommended tips were also sent by email along with a video link which I really appreciated. Great job. Great product. Larry's additional focus and reply to question is an added bonus! Recommend to anyone. Did Reflex Pro II on my M2 wheels but now must add Gelee too them too...its that good of a product.

Complete My Regimen

FAQ

Reviews

Customer Reviews