Home / Polishing / Sheer Cutting Pad

AMMO SHEER wool cutting pad for car polishing

Close-up of the natural wool fibers on an AMMO SHEER cutting pad

AMMO SHEER wool cutting pad attached to a dual action polisher

Sheer Cutting Pad

Name: Sheer Cutting Pad
Brand: AMMONYC
SKU: 60851-18830
Price: 13.00 USD
Availability: InStock

Wool Cutting Pad

$13.00

3 Inch

5 Inch

6 Inch

Free Shipping on Orders $160+

Select WÄFL Finishing Pad
WÄFL Finishing Pad
Waffle Foam Finishing Pad

$13.00
Select X-Foliate Polishing Fluid
X-Foliate Polishing Fluid
Refined Paint Polish

$25.00
Select White MF Polishing Towels
White MF Polishing Towels
4 Pack KEEP IT CLEAN® Polishing Towels

$16.00

THE ROLE

Precision Tool for Paint Correction

Remove defects. Restore the surface.

This is where correction begins.

AMMO SHEER is a high-performance wool cutting pad engineered for large-stroke dual-action polishers designed to remove defects quickly while maintaining control and finish quality. Cutting removes material. Proper technique, pressure, and pad movement are essential to avoid over-correction or uneven results. Follow with a finishing step (WÄFL) to refine the surface and restore full clarity.

The natural wool fibers provide effective cutting action, reaching into imperfections to level the surface without excessive heat or instability.

Controlled cut. Predictable results.

Durable wool finishing pad
Rejuvenates paint gloss, clarity, and luster
Removes paint defects, scratches, swirls, and hazing
Premium wool fibers optimized for superior cut
Non-Tapered pad allows precise edge control on tight body panels
Available in 6 inch, 5 inch, and 3 inch diameters for multiple buffers

HOW TO USE

1. Center SHEER CUTTING PAD on the backing plate of the polisher and lay on a bench with the pad facing up.

2. Prime pad with X-FOLIATE in 3 to 4 concentric circles.

3. Massage X-FOLIATE into every fiber while wearing clean latex gloves or use a putty knife to spread so that it covers every fiber. Avoid polishing with "dry fibers" as it will not cut or finish properly.

4. Place the pad face down on the paint before pulling the variable speed trigger.

5. Gently pump the pad up and down on the paint while priming to force X-FOLIATE into the fibers of the pad.

6. Once primed, add 3 small dots and work a 2 x 2 foot section of the paint at a time.

TIP: For best results, keep machine speed between 2.5 and 3. Blow out or clean the pad with a microfiber towel frequently, then reapply a large X-shape of X-FOLIATE on the pad before moving on to the next panel.