AMMO REFLEX V ENAMEL COAT

1. Wear latex gloves, eye protection, mask, and work in a well-ventilated area.

2. Prior to first coat application, wash and clay the paint if needed.

3. If needed, use isopropyl alcohol mixed 50-50 with water or an automotive grade wax and silicone remover to decontaminate surface.

4. Prime microfiber applicator and apply in overlapping motions in 2x2 sections. Paint should be cool to the touch and out of direct sunlight.

5. Allow 1-3 minutes dwell time (wait for the product to sweat/bead on the surface) in ideal low-humidity conditions. In a humid environment or over PPF, buff off directly after complete panel coverage.

6. Lightly remove excess with clean microfiber towels. Use first towel to level + lift residue and second towel for final wipe.

7. Use 1 full bottle per application.

9. Allow 12 hours cure time in warm weather, 16 hours in cold. No water for 6 hours (min) after application. No washing for 5 days.

• Product Label
• Safety Data Sheet
• California Cleaning Right to Know
• Links to designated lists

Q: Is Reflex V a Ceramic Coating?

A: Yes. Coatings vary drastically, but this has a very high percentage (once cured) of SiO2 with carbon residues. This product contains, polysilazanes, solvents, and additives which are thermo-setting resins at room temperture. (ie do not require a UV light)

Q: How do I maintain Reflex V?

A: Maintenance is exactly the same as a non-coated car, however, abrasives will remove the coating. In other words, perform a healthy wash (when needed) with AMMO Foam or favorite car soap, dry with Hydrate, and use Reflex Pro Top Coat as often as you feel is required. The more layers of protetection (Skin, Reflex Pro Top Coat, Blush, etc...) the more protected the "base layer" of Reflex V will be.

Q: How long does Reflex Pro V take to cure?

A: Depends on humidity and ambient temps, but 1 to 3 minutes is the average flash time. Work one panel at a time. The product will sweat and bead on the surface when ready for the leveling buff off. In a hot humid environment, buff off directly after application. A full bottle is advised for one application and minimum curing time of 12 hours in a dry environment. Reflex V may take up to a week to fully set, do not wash for 5 days.

Q: How do I prep the paint before applying Reflex V?

A: Wash the paint, remove the contaminants with clay (if necessary), compound and polishing (if necessary) is always the best option as the Reflex V will have extra depth and shine over "leveled" paint. Light ISO wipes (spray on towel first) can be helpful if paint was recently waxed. Apply out of direct sunlight and paint should be cool to the touch. Best applied to completely clean unprotected paint.

Q: Can I use other paint care products (wax, sealant, spray wax) after Reflex V is applied?

A: Yes. However, the top layer (most upper surface) will give the paint its water characteristics. Hydrophobic or Hydrophilic.

Q: Is Reflex V safe on matte paint or vinyl wraps?

A: Yes. It will bring more depth or "richness" to the color but it will not be "shiny" afterwards. Matte finishes can cure faster so perform a test application and buff off immediately. I highly recommend it on matte paint or vinyl as it is really the only type of protection for those areas without causing a deep shine (therefore defeating the matte finish).